Courses tagged with "International development" (78)

This course begins with the foundations of 3D elasticity, fluid and elastic wave equations, elastic and plastic waves in rods and beams, waves in plates, and dynamics and acoustics of cylindrical shells. The course considers acoustic fluids effects such as radiation and scattering by submerged plates and shells, and interaction between structural elements. Finally, it covers the response of plates and shells to high-intensity loads, dynamic plasticity and fracture, and structural damage caused by implosive and impact loads.

This course was originally offered in Course 13 (Department of Ocean Engineering) as 13.811. In 2005, ocean engineering subjects became part of Course 2 (Department of Mechanical Engineering), and this course was renumbered 2.067.

This course examines wave equations for fluid and visco-elastic media, wave-theory formulations of acoustic source radiation and seismo-acoustic propagation in stratified ocean waveguides, and Wavenumber Integration and Normal Mode methods for propagation in plane-stratified media. Also covered are Seismo-Acoustic modeling of seabeds and ice covers, seismic interface and surface waves in a stratified seabed, Parabolic Equation and Coupled Mode approaches to propagation in range-dependent ocean waveguides, numerical modeling of target scattering and reverberation clutter in ocean waveguides, and ocean ambient noise modeling. Students develop propagation models using all the numerical approaches relevant to state-of-the-art acoustic research.

This course was originally offered in Course 13 (Department of Ocean Engineering) as 13.853. In 2005, ocean engineering subjects became part of Course 2 (Department of Mechanical Engineering), and this course was renumbered 2.068.

This course is a comprehensive introduction to control system synthesis in which the digital computer plays a major role, reinforced with hands-on laboratory experience. The course covers elements of real-time computer architecture; input-output interfaces and data converters; analysis and synthesis of sampled-data control systems using classical and modern (state-space) methods; analysis of trade-offs in control algorithms for computation speed and quantization effects. Laboratory projects emphasize practical digital servo interfacing and implementation problems with timing, noise, and nonlinear devices.

The course covers the basic techniques for evaluating the maximum forces and loads over the life of a marine structure or vehicle, so as to be able to design its basic configuration. Loads and motions of small and large structures and their short-term and long-term statistics are studied in detail and many applications are presented in class and studied in homework and laboratory sessions. Issues related to seakeeping of ships are studied in detail. The basic equations and issues of maneuvering are introduced at the end of the course. Three laboratory sessions demonstrate the phenomena studied and provide experience with experimental methods and data processing.

This course was originally offered in Course 13 (Ocean Engineering) as 13.42.

This course develops the theory and design of hydrofoil sections, including lifting and thickness problems for sub-cavitating sections, unsteady flow problems, and computer-aided design of low drag cavitation-free sections. It also covers lifting line and lifting surface theory with applications to hydrofoil craft, rudder, control surface, propeller and wind turbine rotor design. Other topics include computer-aided design of wake adapted propellers; steady and unsteady propeller thrust and torque; performance analysis and design of wind turbine rotors in steady and stochastic wind; and numerical principles of vortex lattice and lifting surface panel methods. Projects illustrate the development of computational methods for lifting, propeller and wind turbine flows, and use of state-of-the-art simulation methods for lifting, propulsion and wind turbine applications.

Turbulent flows, with emphasis on engineering methods. Governing equations for momentum, energy, and species transfer.

Turbulence: its production, dissipation, and scaling laws. Reynolds averaged equations for momentum, energy, and species transfer. Simple closure approaches for free and bounded turbulent shear flows. Applications to jets, pipe and channel flows, boundary layers, buoyant plumes and thermals, and Taylor dispersion, etc., including heat and species transport as well as flow fields. Introduction to more complex closure schemes, including the k-epsilon, and statistical methods in turbulence.

Water supply is a problem of worldwide concern: more than 1 billion people do not have reliable access to clean drinking water. Water is a particular problem for the developing world, but scarcity also impacts industrial societies. Water purification and desalination technology can be used to convert brackish ground water or seawater into drinking water. The challenge is to do so sustainably, with minimum cost and energy consumption, and with appropriately accessible technologies.

This subject will survey the state-of-the-art in water purification by desalination and filtration. Fundamental thermodynamic and transport processes which govern the creation of fresh water from seawater and brackish ground water will be developed. The technologies of existing desalination systems will be discussed, and factors which limit the performance or the affordability of these systems will be highlighted. Energy efficiency will be a focus. Nanofiltration and emerging technologies for desalination will be considered. A student project in desalination will involve designing a well-water purification system for a village in Haiti.

This course studies the fundamentals of how the design and operation of internal combustion engines affect their performance, operation, fuel requirements, and environmental impact. Topics include fluid flow, thermodynamics, combustion, heat transfer and friction phenomena, and fuel properties, with reference to engine power, efficiency, and emissions. Students examine the design features and operating characteristics of different types of internal combustion engines: spark-ignition, diesel, stratified-charge, and mixed-cycle engines. Class includes lab project in the Engine Laboratory.

Fundamentals of photoelectric conversion: charge excitation, conduction, separation, and collection. Lectures cover commercial and emerging photovoltaic technologies and cross-cutting themes, including conversion efficiencies, loss mechanisms, characterization, manufacturing, systems, reliability, life-cycle analysis, risk analysis, and technology evolution in the context of markets, policies, society, and environment.

This course is one of many OCW Energy Courses, and it is an elective subject in MIT's undergraduate Energy Studies Minor. This Institute–wide program complements the deep expertise obtained in any major with a broad understanding of the interlinked realms of science, technology, and social sciences as they relate to energy and associated environmental challenges.

This course introduces theoretical and practical principles of design of oceanographic sensor systems. Topics include: transducer characteristics for acoustic, current, temperature, pressure, electric, magnetic, gravity, salinity, velocity, heat flow, and optical devices; limitations on these devices imposed by ocean environments; signal conditioning and recording; noise, sensitivity, and sampling limitations; and standards. Lectures by experts cover the principles of state-of-the-art systems being used in physical oceanography, geophysics, submersibles, acoustics. For lab work, day cruises in local waters allow students to prepare, deploy and analyze observations from standard oceanographic instruments.

This course presents principles of naval architecture, ship geometry, hydrostatics, calculation and drawing of curves of form, intact and damage stability, hull structure strength calculations and ship resistance. It introduces computer-aided naval ship design and analysis tools. Projects include analysis of ship lines drawings, calculation of ship hydrostatic characteristics, analysis of intact and damaged stability, ship model testing, and hull structure strength calculations.

This course concerns the theory and practice of optical methods in engineering and system design, with an emphasis on diffraction, statistical optics, holography, and imaging. It provides the engineering methodology skills necessary to incorporate optical components in systems serving diverse areas such as precision engineering and metrology, bio-imaging, and computing (sensors, data storage, communication in multi-processor systems). Experimental demonstrations and a design project are included.

Intensive coverage of precision engineering theory, heuristics, and applications pertaining to the design of systems ranging from consumer products to machine tools. Topics covered include: economics, project management, and design philosophy; principles of accuracy, repeatability, and resolution; error budgeting; sensors; sensor mounting; systems design; bearings; actuators and transmissions; system integration driven by functional requirements, and operating physics. Emphasis on developing creative designs, which are optimized by analytical techniques applied via spreadsheets. This is a projects course with lectures consisting of design teams presenting their work and the class helping to develop solutions; thereby everyone learning from everyone's projects.

Multi-scale systems (MuSS) consist of components from two or more length scales (nano, micro, meso, or macro-scales). In MuSS, the engineering modeling, design principles, and fabrication processes of the components are fundamentally different. The challenge is to make these components so they are conceptually and model-wise compatible with other-scale components with which they interface. This course covers the fundamental properties of scales, design theories, modeling methods and manufacturing issues which must be addressed in these systems. Examples of MuSS include precision instruments, nanomanipulators, fiber optics, micro/nano-photonics, nanorobotics, MEMS (piezoelectric driven manipulators and optics), X-Ray telescopes and carbon nano-tube assemblies. Students master the materials through problem sets and a project literature critique.

This course addresses the design of tribological systems: the interfaces between two or more bodies in relative motion. Fundamental topics include: geometric, chemical, and physical characterization of surfaces; friction and wear mechanisms for metals, polymers, and ceramics, including abrasive wear, delamination theory, tool wear, erosive wear, wear of polymers and composites; and boundary lubrication and solid-film lubrication. The course also considers the relationship between nano-tribology and macro-tribology, rolling contacts, tribological problems in magnetic recording and electrical contacts, and monitoring and diagnosis of friction and wear. Case studies are used to illustrate key points.

This course studies what makes a good design and how one develops a good design. Students consider how the design of engineered systems (such as hardware, software, materials, and manufacturing systems) differ from the "design" of natural systems such as biological systems; discuss complexity and how one makes use of complexity theory to improve design; and discover how one uses axiomatic design theory (AD theory) in design of many different kinds of engineered systems. Questions are analyzed using Axiomatic Design Theory and Complexity Theory. Case studies are presented including the design of machines, tribological systems, materials, manufacturing systems, and recent inventions. Implications of AD and complexity theories on biological systems discussed.

This half-semester course studies the economics of the principal markets related to marine transportation, environment, and natural resources. Topics include structures of the markets and industries involved; competition; impacts of policies and regulations. The course analyzes the relationship among industries, markets, technologies, and national policies, and introduces the concepts of national income accounts, sustainability, and intergenerational equity and their relationship to current economic practice.

This course begins with a comparative review of conventional and advanced multiple attribute decision making (MADM) models in engineering practice. Next, a new application of particular MADM models in reliable material selection of sensitive structural components as well as a multi-criteria Taguchi optimization method is discussed. Other specific topics include dealing with uncertainties in material properties, incommensurability in decision-makers opinions for the same design, objective ways of weighting performance indices, rank stability analysis, compensations and non-compensations.

This course is offered during the Independent Activities Period (IAP), which is a special 4-week term at MIT that runs from the first week of January until the end of the month.