Courses tagged with "International development" (78)

This course is offered to undergraduates and introduces students to the formulation, methodology, and techniques for numerical solution of engineering problems. Topics covered include: fundamental principles of digital computing and the implications for algorithm accuracy and stability, error propagation and stability, the solution of systems of linear equations, including direct and iterative techniques, roots of equations and systems of equations, numerical interpolation, differentiation and integration, fundamentals of finite-difference solutions to ordinary differential equations, and error and convergence analysis. The subject is taught the first half of the term.

This subject was originally offered in Course 13 (Department of Ocean Engineering) as 13.002J. In 2005, ocean engineering became part of Course 2 (Department of Mechanical Engineering), and this subject was renumbered 2.993J.

This course covers fundamentals of thermodynamics, chemistry, flow and transport processes as applied to energy systems. Topics include analysis of energy conversion in thermomechanical, thermochemical, electrochemical, and photoelectric processes in existing and future power and transportation systems, with emphasis on efficiency, environmental impact and performance. Systems utilizing fossil fuels, hydrogen, nuclear and renewable resources, over a range of sizes and scales are discussed. Applications include fuel reforming, hydrogen and synthetic fuel production, fuel cells and batteries, combustion, hybrids, catalysis, supercritical and combined cycles, photovoltaics, etc. The course also deals with different forms of energy storage and transmission, and optimal source utilization and fuel-life cycle analysis.

This class is an introduction to the dynamics and vibrations of lumped-parameter models of mechanical systems. Topics include kinematics; force-momentum formulation for systems of particles and rigid bodies in planar motion; work-energy concepts; virtual displacements and virtual work; Lagrange's equations for systems of particles and rigid bodies in planar motion; linearization of equations of motion; linear stability analysis of mechanical systems; free and forced vibration of linear multi-degree of freedom models of mechanical systems; and matrix eigenvalue problems. The class includes an introduction to numerical methods and using MATLAB® to solve dynamics and vibrations problems.

This version of the class stresses kinematics and builds around a strict but powerful approach to kinematic formulation which is different from the approach presented in Spring 2007. Our notation was adapted from that of Professor Kane of Stanford University.

This course discusses the Linearized theory of wave phenomena in applied mechanics. Examples are chosen from elasticity, acoustics, geophysics, hydrodynamics and other subjects. The topics include: basic concepts, one dimensional examples, characteristics, dispersion and group velocity, scattering, transmission and reflection, two dimensional reflection and refraction across an interface, mode conversion in elastic waves, diffraction and parabolic approximation, radiation from a line source, surface Rayleigh waves and Love waves in elastic media, waves on the sea surface and internal waves in a stratified fluid, waves in moving media, ship wave pattern, atmospheric lee waves behind an obstacle, and waves through a laminated media.

This course provides a solid theoretical foundation for the analysis and processing of experimental data, and real-time experimental control methods. Topics covered include spectral analysis, filter design, system identification, and simulation in continuous and discrete-time domains. The emphasis is on practical problems with laboratory exercises.

This course gives an overview of engineering management and covers topics such as financial principles, management of innovation, technology strategy, and best management practices. The focus of the course is the development of individual skills and team work. This is carried out through an exposure to management tools.

This graduate-level course provides a unified treatment of nonlinear oscillations and wave phenomena with applications to mechanical, optical, geophysical, fluid, electrical and flow-structure interaction problems.

This course explores statistical modeling and control in manufacturing processes. Topics include the use of experimental design and response surface modeling to understand manufacturing process physics, as well as defect and parametric yield modeling and optimization. Various forms of process control, including statistical process control, run by run and adaptive control, and real-time feedback control, are covered. Application contexts include semiconductor manufacturing, conventional metal and polymer processing, and emerging micro-nano manufacturing processes.

This course provides intensive coverage of the theory and practice of electromechanical instrument design with application to biomedical devices. Students will work with MGH doctors to develop new medical products from concept to prototype development and testing. Lectures will present techniques for designing electronic circuits as part of complete sensor systems. Topics covered include: basic electronics circuits, principles of accuracy, op amp circuits, analog signal conditioning, power supplies, microprocessors, wireless communications, sensors, and sensor interface circuits. Labs will cover practical printed circuit board (PCB) design including component selection, PCB layout, assembly, and planning and budgeting for large projects. Problem sets and labs in the first six weeks are in support of the project. Major team-based design, build, and test project in the last six weeks. Student teams will be composed of both electrical engineering and mechanical engineering students.

This course provides an introduction to the mechanics of solids with applications to science and engineering. We emphasize the three essential features of all mechanics analyses, namely: (a) the geometry of the motion and/or deformation of the structure, and conditions of geometric fit, (b) the forces on and within structures and assemblages; and (c) the physical aspects of the structural system (including material properties) which quantify relations between the forces and motions/deformation.

Upon successful completion of this course, students will be able to:

• Create lumped parameter models (expressed as ODEs) of simple dynamic systems in the electrical and mechanical energy domains
• Make quantitative estimates of model parameters from experimental measurements
• Obtain the time-domain response of linear systems to initial conditions and/or common forcing functions (specifically; impulse, step and ramp input) by both analytical and computational methods
• Obtain the frequency-domain response of linear systems to sinusoidal inputs
• Compensate the transient response of dynamic systems using feedback techniques
• Design, implement and test an active control system to achieve a desired performance measure

Mastery of these topics will be assessed via homework, quizzes/exams, and lab assignments.

This course reviews momentum and energy principles, and then covers the following topics: Hamilton's principle and Lagrange's equations; three-dimensional kinematics and dynamics of rigid bodies; steady motions and small deviations therefrom, gyroscopic effects, and causes of instability; free and forced vibrations of lumped-parameter and continuous systems; nonlinear oscillations and the phase plane; nonholonomic systems; and an introduction to wave propagation in continuous systems.

This course was originally developed by Professor T. Akylas.

This is an engineering laboratory subject for mechanical engineering juniors and seniors. Major emphasis is on interplay between analytical and experimental methods in solution of research and development problems. Communication (written and oral) of results is also a strong component of the course. Groups of two or three students work together on three projects during the term.

This course is a survey of principal concepts and methods of fluid dynamics. Topics include mass conservation, momentum, and energy equations for continua; Navier-Stokes equation for viscous flows; similarity and dimensional analysis; lubrication theory; boundary layers and separation; circulation and vorticity theorems; potential flow; introduction to turbulence; lift and drag; surface tension and surface tension driven flows.

This course covers the following topics: models of manufacturing systems, including transfer lines and flexible manufacturing systems; calculation of performance measures, including throughput, in-process inventory, and meeting production commitments; real-time control of scheduling; effects of machine failure, set-ups, and other disruptions on system performance.

This course is intended for first year graduate students and advanced undergraduates with an interest in design of ships or offshore structures. It requires a sufficient background in structural mechanics. Computer applications are utilized, with emphasis on the theory underlying the analysis. Hydrostatic loading, shear load and bending moment, and resulting primary hull primary stresses will be developed. Topics will include; ship structural design concepts, effect of superstructures and dissimilar materials on primary strength, transverse shear stresses in the hull girder, and torsional strength among others. Failure mechanisms and design limit states will be developed for plate bending, column and panel buckling, panel ultimate strength, and plastic analysis. Matrix stiffness, grillage, and finite element analysis will be introduced. Design of a ship structure will be analyzed by "hand" with desktop computer tools and a final design project using current applications for structural design of a section will be accomplished.

This course was originally offered in Course 13 (Department of Ocean Engineering) as 13.122. In 2005, ocean engineering subjects became part of Course 2 (Department of Mechanical Engineering), and this course was renumbered 2.082.   

This course introduces finite element methods for the analysis of solid, structural, fluid, field, and heat transfer problems. Steady-state, transient, and dynamic conditions are considered. Finite element methods and solution procedures for linear and nonlinear analyses are presented using largely physical arguments. The homework and a term project (for graduate students) involve use of the general purpose finite element analysis program ADINA. Applications include finite element analyses, modeling of problems, and interpretation of numerical results.

This course presents finite element theory and methods for general linear and nonlinear analyses. Reliable and effective finite element procedures are discussed with their applications to the solution of general problems in solid, structural, and fluid mechanics, heat and mass transfer, and fluid-structure interactions. The governing continuum mechanics equations, conservation laws, virtual work, and variational principles are used to establish effective finite element discretizations and the stability, accuracy, and convergence are discussed. The homework and the student-selected term project using the general-purpose finite element analysis program ADINA are important parts of the course.

This course provides an overview of robot mechanisms, dynamics, and intelligent controls. Topics include planar and spatial kinematics, and motion planning; mechanism design for manipulators and mobile robots, multi-rigid-body dynamics, 3D graphic simulation; control design, actuators, and sensors; wireless networking, task modeling, human-machine interface, and embedded software. Weekly laboratories provide experience with servo drives, real-time control, and embedded software. Students will design and fabricate working robotic systems in a group-based term project.

This course addresses the modeling and analysis of static equilibrium problems with an emphasis on real world engineering systems and problem solving.